View MPC7410_5959771.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

this document describes part-number-speci? changes to recommended operating conditions and revised electrical speci?ations, as applicable, from those described in the general MPC7410 hardware speci?ations (order #: MPC7410ec/d). speci?ations provided in this document supersede those in the MPC7410 hardware speci?ations , for the part numbers listed in table a only. speci?ations not addressed herein are unchanged. because this document is frequently updated, refer to http://www.motorola.com/semiconductors or to your motorola sales of?e for the latest version. note that headings and table numbers in this document are not consecutively numbered. they are intended to correspond to the heading or table affected in the general hardware speci?ation. part numbers addressed in this document are listed in table a. for more detailed ordering information, see table 17. advance information MPC7410rxpdpns/d rev. 1, 10/2002 MPC7410 part number specification for the MPC7410rxnnnpd series motorola part numbers affected: xpc7410rx450pd xpc7410rx500pd xpc7410rx533pd f r e e s c a l e s e m i c o n d u c t o r , i freescale semiconductor, inc. f o r m o r e i n f o r m a t i o n o n t h i s p r o d u c t , g o t o : w w w . f r e e s c a l e . c o m n c . . .
2 MPC7410 part number speci?ation for the MPC7410rxnnnpd series motorola features 1.2 features this section summarizes changes to the features of the MPC7410 described in the MPC7410 hardware speci?ations , which are none. 1.4.1 dc electrical characteristics table 3 provides the recommended operating conditions for the MPC7410 part numbers described herein. table a. part numbers addressed by this data sheet motorola part number operating conditions signi?ant differences from hardware speci?ation cpu frequency vdd t j (?) xpc7410rx450pd 450 mhz 2.0v?0mv 0 to 65 modi?d voltage & temperature speci?ation to achieve 450mhz frequency xpc7410rx500pd 500 mhz 2.0v?0mv 0 to 65 modi?d voltage & temperature speci?ation to achieve 500mhz frequency xpc7410rx533pd 533 mhz 2.0v?0mv 0 to 65 modi?d voltage & temperature speci?ation to achieve 533mhz frequency note: the x pre? in a motorola powerpc part number designates a ?ilot production prototype as de?ed by motorola sop 3-13. these are from a limited production volume of prototypes manufactured, tested and q.a. inspected on a quali?d technology to simulate normal production. these parts have only preliminary reliability and characterization data. before pilot production prototypes may be shipped, written authorization from the customer must be on ?e in the applicable sales of?e acknowledging the quali?ation status and the fact that product changes may still occur while shipping pilot production prototypes. table 3. recommended operating conditions characteristic symbol recommended value unit core supply voltage vdd 2.0v ?50mv v pll supply voltage avdd 2.0v ? 0mv v l2 dll supply voltage l2avdd 2.0v ?50mv v processor bus supply voltage bvsel = 1 or bvsel = hreset ovdd 2.5v ?125mv v bvsel = gnd ovdd 1.8v ?90mv v l2 bus supply voltage l2vsel = 1 or l2vsel = hreset l2ovdd 2.5v ?125mv v l2vsel = gnd l2ovdd 1.8v ?90mv v f r e e s c a l e s e m i c o n d u c t o r , i freescale semiconductor, inc. f o r m o r e i n f o r m a t i o n o n t h i s p r o d u c t , g o t o : w w w . f r e e s c a l e . c o m n c . . .
motorola MPC7410 part number speci?ation for the MPC7410rxnnnpd series 3 dc electrical characteristics table 6 provides the power consumption for the MPC7410 part at the frequencies described herein. input voltage processor bus v in gnd to ovdd v l2 bus v in gnd to l2ovdd v jtag signals v in gnd to ovdd v die-junction temperature t j 0-65 ? note: these are the recommended and tested operating conditions. proper device operation outside of these conditions is not guaranteed. table 6. power consumption for MPC7410 processor (cpu) frequency processor (cpu) frequency processor (cpu) frequency unit notes 450mhz 500mhz 533mhz full-on mode typical maximum 5.9 6.5 6.9 w 1, 3 13.2 14.7 15.6 w 1, 2 doze mode maximum 4.5 5 5.3 w 1, 2 nap mode maximum 2.13 2.25 2.33 w 1, 2 sleep mode maximum 2.13 2.25 2.33 w 1, 2 sleep mode?ll and dll disabled typical 0.5 0.5 0.5 w 1, 3 maximum 2.0 2.0 2.0 w 1, 2 notes: 1. these values apply for all valid processor bus and l2 bus ratios. the values do not include i/o supply power (ovdd and l2ovdd) or pll/dll supply power (avdd and l2avdd). ovdd and l2ovdd power is system dependent, but is typically <10% of vdd power. worst case power consumption for avdd = 15 mw and l2avdd = 15 mw. 2. maximum power is measured at 65 ? and vdd = 2.0v while running an entirely cache-resident, contrived sequence of instructions which keep the execution units, including altivec, maximally busy. 3. typical power is an average value measured at 65 ? and vdd = 2.0v in a system while running typical benchmarks. table 3. recommended operating conditions (continued) characteristic symbol recommended value unit f r e e s c a l e s e m i c o n d u c t o r , i freescale semiconductor, inc. f o r m o r e i n f o r m a t i o n o n t h i s p r o d u c t , g o t o : w w w . f r e e s c a l e . c o m n c . . .
4 MPC7410 part number speci?ation for the MPC7410rxnnnpd series motorola dc electrical characteristics 1.4.2.1 clock ac speci?ations table 7 provides the additional clock ac timing speci?ations described in this document. refer to the MPC7410 hardware speci?ation for the remaining frequencies . table 7. clock ac timing speci?ations at recommended operating conditions (see table 3.) characteristic symbol 450 mhz 500 mhz 533 mhz unit notes min max min max min max processor frequency f core 300 450 300 500 300 533 mhz vco frequency f vco 600 900 600 1000 600 1066 mhz sysclk frequency f sysclk 33 133 33 133 33 133 mhz 1 sysclk cycle time t sysclk 7.5 30 7.5 30 7.5 30 ns sysclk rise and fall time t kr 1.0 1.0 1.0 ns 2 t kf 0.5 0.5 0.5 ns 3 sysclk duty cycle measured at ovdd/2 t khkl /t sys clk 40 60 40 60 40 60 % 4 sysclk jitter ?50 ?50 ?50 ps 5 internal pll relock time 100 100 100 s6 note: see general hardware speci?ation. f r e e s c a l e s e m i c o n d u c t o r , i freescale semiconductor, inc. f o r m o r e i n f o r m a t i o n o n t h i s p r o d u c t , g o t o : w w w . f r e e s c a l e . c o m n c . . .
motorola MPC7410 part number speci?ation for the MPC7410rxnnnpd series 5 dc electrical characteristics 1.4.2.2 processor bus ac speci?ations table 8 provides the processor bus ac timing speci?ations for the MPC7410 part described in this document . table 8. processor bus ac timing speci?ations at vdd=avdd=2.0v?0mv; 0 tj 65?, ovdd = 2.5v?.125v and ovdd = 1.8v?.090v, 60x bus at 133mhz parameter symbol 450, 500, 533 mhz unit notes min max mode select input setup to hreset t mvrh 8t sysclk 2,3,4,5 hreset to mode select input hold t mxrh 0 ns 2,3,5 setup times: address/transfer attribute transfer start (ts ) data/data parity ar tr y /shd0 /shd1 all other inputs t avkh t tsvkh t dvkh t arvkh t ivkh 1.4 1.4 1.4 1.4 1.4 ns 10 6 7 8 input hold times: address/transfer attribute transfer start (ts ) data/data parity ar tr y /shd0 /shd1 all other inputs t axkh t tsxkh t dxkh t arxkh t ixkh 0 0 0 0 0 ns 11 6 7 8 valid times: address/transfer attribute ts , abb , dbb data data parity ar tr y /shd0 /shd1 all other outputs t khav t khtsv t khdv t khdpv t kharv t khov 3.0 3.0 3.5 3.5 2.3 3.0 ns 12 6 7 7 9 output hold times: address/transfer attribute ts , abb , dbb data/data parity ar tr y /shd0 /shd1 all other outputs t khax t khtsx t khdx t kharx t khox 0.75 0.75 0.6 0.75 0.75 ns 13 6 7 9 sysclk to output enable t khoe 0.5 ns 14 sysclk to output high impedance (all except ts , abb/amon(0) , ar tr y /shd , dbb/dmon(0) t khoz 3.5 ns 15 f r e e s c a l e s e m i c o n d u c t o r , i freescale semiconductor, inc. f o r m o r e i n f o r m a t i o n o n t h i s p r o d u c t , g o t o : w w w . f r e e s c a l e . c o m n c . . .
6 MPC7410 part number speci?ation for the MPC7410rxnnnpd series motorola dc electrical characteristics 1.4.2.3 l2 clock ac speci?ations table 9 provides the l2clk output ac timing speci?ations for the MPC7410 part described in this document. sysclk to ts , abb/amon(0) , dbb/dmon(0) high impedance after precharge t khabpz 1.0 t sysclk 4,15, 16,17 maximum delay to ar tr y /shd0 /shd1 precharge t kharp ?t sysclk 4,17 sysclk to ar tr y /shd0 /shd1 high impedance after precharge t kharpz ?t sysclk 4,17 note: see general hardware speci?ation. table 9. l2clk output ac timing speci?ations at recommended operating conditions (see table 3.) parameter symbol 450 mhz 500 mhz 533 mhz unit notes min max min max min max l2clk frequency f l2clk 150 225 150 250 150 266 mhz 1 l2clk cycle time t l2clk 4.4 6.67 4.0 6.67 3.76 6.67 ns l2clk duty cycle t chcl /t l2 clk 50 50 50 % 2 internal dll-relock time 640 640 640 l2clk 4 dll capture window ?00 ?00 ?00 ns 5 note: see general hardware speci?ation. table 8. processor bus ac timing speci?ations (continued) at vdd=avdd=2.0v?0mv; 0 tj 65?, ovdd = 2.5v?.125v and ovdd = 1.8v?.090v, 60x bus at 133mhz parameter symbol 450, 500, 533 mhz unit notes min max f r e e s c a l e s e m i c o n d u c t o r , i freescale semiconductor, inc. f o r m o r e i n f o r m a t i o n o n t h i s p r o d u c t , g o t o : w w w . f r e e s c a l e . c o m n c . . .
motorola MPC7410 part number speci?ation for the MPC7410rxnnnpd series 7 dc electrical characteristics 1.4.2.4 l2 bus ac speci?ations table 10 provides the l2 bus interface ac timing speci?ations for the frequencies described in this document. table 10. l2 bus interface ac timing speci?ations at vdd=avdd=l2avdd= 2.05v?0mv; 0 tj 65?, l2ovdd = 2.5v?.125v and l2ovdd =1.8v?.090v parameter symbol 450 mhz 500 mhz 533 mhz unit notes min max min max min max l2sync_in rise and fall time t l2cr & t l2cf 1.0 1.0 1.0 ns 1 setup times: data and parity t dvl2ch 1.375 1.250 1.168 ns 2 input hold times: data and parity t dxl2ch 0.0 0.0 0.0 ns 2 valid times: all outputs when l2cr[14-15] = 00 all outputs when l2cr[14-15] = 01 all outputs when l2cr[14-15] = 10 all outputs when l2cr[14-15] = 11 t l2chov - - - - 2.375 tbd tbd tbd - - - - 2.25 tbd tbd tbd - - - - 2.17 tbd tbd tbd ns 3,4 output hold times all outputs when l2cr[14-15] = 00 all outputs when l2cr[14-15] = 01 all outputs when l2cr[14-15] = 10 all outputs when l2cr[14-15] = 11 t l2chox 0.55 tbd tbd tbd - - - - 0.5 tbd tbd tbd - - - - 0.47 tbd tbd tbd - - - - ns 3 l2sync_in to high impedance: all outputs when l2cr[14-15] = 00 all outputs when l2cr[14-15] = 01 all outputs when l2cr[14-15] = 10 all outputs when l2cr[14-15] = 11 t l2choz - - - - 2.0 2.5 3.0 3.5 - - - - 2.0 2.5 3.0 3.5 - - - - 2.0 2.5 3.0 3.5 ns note: see general hardware speci?ation. f r e e s c a l e s e m i c o n d u c t o r , i freescale semiconductor, inc. f o r m o r e i n f o r m a t i o n o n t h i s p r o d u c t , g o t o : w w w . f r e e s c a l e . c o m n c . . .
8 MPC7410 part number speci?ation for the MPC7410rxnnnpd series motorola document revision history 1.9 document revision history table 16 provides a revision history for this part number speci?ation. 1.10 ordering information 1.10.1 part numbers addressed by this speci?ation table 17 provides the ordering information for the MPC7410 part described in this document. table 17. part-marking nomenclature table 16. document revision history document revision substantive changes rev 0 initial release rev 1 minor formatting section 1.10.1 - added table 17 - part-marking nomenclature mpc 7410 rx xxx x x product code part identi?r package processor frequency 1 application modi?r revision level xpc 2 7410 rx = cbga 450 500 533 p: 2.0 v ?50 mv 0 to 65 c d: 1.3; pvr = 800c 1103 notes: 1. processor core frequencies supported by parts addressed by this speci?ation only. parts addressed by other speci?ations may support other maximum core frequencies. 2. the x pre? in a motorola powerpc part number designates a ?ilot production prototype as de?ed by motorola sop 3-13. these are from a limited production volume of prototypes manufactured, tested and q.a. inspected on a quali?d technology to simulate normal production. these parts have only preliminary reliability and characterization data. before pilot production prototypes may be shipped, written authorization from the customer must be on ?e in the applicable sales of?e acknowledging the quali?ation status and the fact that product changes may still occur while shipping pilot production prototypes. f r e e s c a l e s e m i c o n d u c t o r , i freescale semiconductor, inc. f o r m o r e i n f o r m a t i o n o n t h i s p r o d u c t , g o t o : w w w . f r e e s c a l e . c o m n c . . .
motorola MPC7410 part number speci?ation for the MPC7410rxnnnpd series 9 ordering information 1.10.3 part marking parts are marked as the example shown in figure 26. figure 26. motorola part marking for bga device bga notes: ccccc is the country of assembly (this space is left blank if parts are assembled in the united states) mmmmmm is the 6-digit mask number atwlyywwa is the traceability code xpc7410 rx nnn pd mmmmmm atwlyywwa 7410 nnn is the speed grade of the part f r e e s c a l e s e m i c o n d u c t o r , i freescale semiconductor, inc. f o r m o r e i n f o r m a t i o n o n t h i s p r o d u c t , g o t o : w w w . f r e e s c a l e . c o m n c . . .
10 MPC7410 part number speci?ation for the MPC7410rxnnnpd series motorola ordering information f r e e s c a l e s e m i c o n d u c t o r , i freescale semiconductor, inc. f o r m o r e i n f o r m a t i o n o n t h i s p r o d u c t , g o t o : w w w . f r e e s c a l e . c o m n c . . .
motorola MPC7410 part number speci?ation for the MPC7410rxnnnpd series 11 ordering information f r e e s c a l e s e m i c o n d u c t o r , i freescale semiconductor, inc. f o r m o r e i n f o r m a t i o n o n t h i s p r o d u c t , g o t o : w w w . f r e e s c a l e . c o m n c . . .
MPC7410rxpdpns/d how to reach us: usa/europe/locations not listed: motorola literature distribution p.o. box 5405, denver, colorado 80217 1-303-675-2140 or 1-800-441-2447 japan: motorola japan ltd. sps, technical information center 3-20-1, minami-azabu minato-ku tokyo 106-8573 japan 81-3-3440-3569 asia/pacific: motorola semiconductors h.k. ltd. silicon harbour centre, 2 dai king street tai po industrial estate, tai po, n.t., hong kong 852-26668334 technical information center: 1-800-521-6274 home page: http://www.motorola.com/semiconductors document comments: fax (512) 933-2625 attn: risc applications engineering information in this document is provided solely to enable system and software implementers to use motorola products. there are no express or implied copyright licenses granted hereunder to design or fabricate any integrated circuits or integrated circuits based on the information in this document. motorola reserves the right to make changes without further notice to any products herein. motorola makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does motorola assume any liability arising out of the application or use of any product or circuit, and speci?ally disclaims any and all liability, including without limitation consequential or incidental damages. ?ypical parameters which may be provided in motorola data sheets and/or speci?ations can and do vary in different applications and actual performance may vary over time. all operating parameters, including ?ypicals must be validated for each customer application by customers technical experts. motorola does not convey any license under its patent rights nor the rights of others. motorola products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the motorola product could create a situation where personal injury or death may occur. should buyer purchase or use motorola products for any such unintended or unauthorized application, buyer shall indemnify and hold motorola and its of?ers, employees, subsidiaries, af?iates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that motorola was negligent regarding the design or manufacture of the part. motorola and the stylized m logo are registered in the u.s. patent and trademark of?e. digital dna is a trademark of motorola, inc. all other product or service names are the property of their respective owners. motorola, inc. is an equal opportunity/af?mative action employer. ?motorola, inc. 2002 f r e e s c a l e s e m i c o n d u c t o r , i freescale semiconductor, inc. f o r m o r e i n f o r m a t i o n o n t h i s p r o d u c t , g o t o : w w w . f r e e s c a l e . c o m n c . . .

▲Up To Search▲

Price & Availability of MPC7410

	To Download MPC7410 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .